Earth Vertical Lift Chair
Charcoal Grey - CH4012
Blue/Grey - CH4102
The Earth lift chair is a three position lift chair that, in addition to lifting in a conventional tilt forward manner, will lift vertically to allow side transfers to or from a bed. It comes standard with incontinent proof upholstery (45% polyurethane and 55% cotton-dacron textile) and features four 3” casters for easy repositioning and transportation of users. With detachable armrests and should wings this chair makes side transfers a possibility for those who are unable to stand.
The Earth lift chair also features a vertical lift function where the entire chair will lift vertically 6” and the arms and shoulder wings can be removed for users who must, or prefer, a side transfer to and from the chair.
With a Wide/Tall size rating, this chair will accommodate people of wider widths and above average heights.
Suitable for users 5' 6" to 6' 3" tall (approximate based on average body proportions).
Product Information
The Earth lift chair is a more institutional chair that has incontinent proof upholstery (45% polyurethane and 55% cotton-dacron textile), vertical lift and removable arms. This chair also comes standard with 3" casters and a push bar to allow the chair to be used as a transport device for users who are unable to walk.
The 6" vertical lift on this chair allows caregivers to adjust the height of the chair to aid in transfers of users from a bed or a wheelchair.
The removable arms allow for side transfers into or out of the chair using siding transfer techniques in a seated or reclined position.
Dimensions
Weight Capacity
- 352 lbs (160 kg)
Seat Size
- Internal Width: 21” (53.3 cm)
- Internal Depth: 20” (50.8 cm)
- Leg Length ( from seat): 16" (40.6 cm)
- Back Height: 30” (76.2 cm)
- Seat Height: 21” - 27" (53.3 - 68.6 cm)
- Arm Height (from seat): 7" (17.8 cm)
Overall Size
- Overall Width: 28” (71.1 cm)
- Overall Length Reclined: 65” (165.1 cm)
- External Base Length: 32" (81.3 cm)
- Vertical Height Range: 6" (15.2 cm)
Shipping Information
The Earth Lift chair is shipped in a two boxes. Below are the dimensions and weights.
- Box 1 Dimensions: 34.7" x 30” x 28.4" (88 x 76.2 x 72cm)
- Box 1 Weight: 67 kgs
- Box 2 Dimensions: 31.1" x 28.8" x 15.4" (79 x 73 x 39 cm)
- Box 2 Weight: 11.8 kgs
Component Size (unpackaged)
- Base: 33.5” x 26.9” x 29.3” (85.1 x 68.4 x 74.4 cm)
- Back: 17” x 26.8” x 31.5” (43.2 x 66 x 80 cm)
Features
- Six inches of vertical height adjustment
- Three position recline
- Four 3" casters with 2 brake on the two back casters
- Push handle to facilitate patient transpot
- Removable arms for side transfers
- Lounger style that fully supports the legs (no gap between footrest and seat)
- Removable back for easy handling
- Easy to use hand control
- Maximum seat elevation with superb stability in full lift position
- Wide construction provides greater side to side stability
- Top steel base for durability and cross supports
- Engineered bushings and washers at pivot points provide quiet smooth operation and durability
- Direct drive activation synchronizes right and left sides for easy opening
- Low voltage motor, 24 volt, UL approved
- Battery backup
Downloads
Product Video
Positioning Explanation
The Earth and Mars lift chairs incorporate 2 motors which allow for positioning by the user for comfort and function.
The controller consists of two buttons to elevate (A) and lower (B) the entire chair. Two other buttons control the stand-up (C) and recline (D) feature of the chair moving the backrest and footrest simultaneously. Note: The stand-up function will not work unless the chair frame is lowered to the ground first.
Warranty
EZee Life™ warrants our Planet lift chair line to be free from material and workmanship problems as follows:
Frames:
- Lifetime warranty on all Planet lift chair frames for original owner.
All other issues:
- Two years warranty on electric parts.
Any alterations, misuse, abuse, or accidental damage voids this warranty. EZee Life™ reserves the right to replace or repair any part that has become defective.
The warranty does not extend to consequential costs resulting from the fault or defect of the product: freight and travel costs, loss of earnings, or other expenses that one may incur.
Warranty is valid for the original purchaser only and the original receipt must be presented before any warranty options are considered. Please also be prepared to provide the date of purchase and serial number.
How to Get Service
Should you require warranty service for your Planet lift chair please contact HPU Medical Wholesale. Fill in our warranty claim form and provide picture where and if relevant.
Once approval is given for warranty, vendor can choose between two levels of service.
- The local dealer can make the needed repairs and invoice us for repair - quote has to be submitted and approved before repair done.
- 3rd party service - once informed of broken lift chair we would arrange for a 3rd party service company to book a time for the repair with the client.
Warranty Claim Forms can be downloaded at https://hpurehab.com/downloads/Planet-Warranty-Form.pdf.
Footrests on Lift Chairs are designed to take the weight of the user's legs only. Chair frames damaged because of excess weight on the footrests, or users entering or leaving the seat without lowering the footrest, are not covered by the warranty.